General Tips On Where To Install Security Cameras

General Tips

  1. Where To Position CCTV Cameras Home
  2. Things To Consider Before Installing CCTV
  3. How Many Security Cameras Do I Need
  4. Wired And Wireless Security Camera System

1. Where To Position CCTV Cameras Home

Tips security Camera Placement Guidelines.The cameras included with your home security system can be installed in a number of different locations in your home.

The main purpose of this post is to guide you about the right position and location and you can get useful results from your home security system.

Camera location is depends on their distance from camera to DVR. In this article you find all General tips about where to Install security cameras in your home.

High Resolution Night Vision Security Camera

Lets suppose in case if you use long range high quality equipment definitely distances will no matters for you.

But normally district matters because not everyone can afford WI-FI long range smart home security system. 

Normally district matters because not everyone can afford Wi-Fi long range smart home security system.

To cover maximum targeted area with high efficiency is only possible when you install camera on a right place.

If cameras are installed out of their focus range then face cannot be recognized and in case of some mishaps you can’t see the required results.

In that case all your effort, time, and money all will wast. Therefore, it is very honest advice to all my readers to please read this completely to end.

2. Things To Consider Before Installing CCTV

You have to mount cameras at an elevated position can keep your cameras out of range of vandals. Or would-be burglars position.

Without sacrificing video quality. Without good quality video, It is not possible to recognize the face. 

General Tips on Where to Install Security Cameras

This one is the most common mistake which normally people doing. Especially those whom first time installing home security systems.

For example, let’s suppose that you installed camera at the position of your backyard gate so you can see the gate and surround area. When someone enters can see and monitor.

Tips Security Camera Placement Guidelines about all  best possible locations so you could get crystal clear results.

Install Security Camera Under Eave

The front of the house installs the camera where the roof meets the walls install the camera.This will can shelter your camera from all the elements that have a better field of view. And make it less likely to be vandalized.

Most burglars will enter your home through the front door of your home or back door. So it’s important to install a camera or cameras here.

It is very important therefore I would like to recommend installing the camera either above the door or to the side placing.

Camera at a slight angle will allow you to see who’s approaching your home front door as well as give you the ability to see the person’s face.

It’s a practice to install a camera so that you have an entire overview of the backyard. Like the camera is installed at the front of the house.

And must be Install the camera where the roof meets the walls of the house it’s the very ideal location.

3. How Many Security Cameras Do I Need

If you have a gate on the side and more than one entrance at the backyard. In that case, you may want to have an additional camera.

To focus on that region place interior cameras in high-traffic areas such as entry and exit point hallways.

How Many Security Cameras Do I Need

And staircases other ideal locations are next to windows and rooms that have high-priced valuables. Such as electronics items, antiques, and jewelry.

One more thing is to consider if you have sliding glass doors that should be covered with cameras.

Sliding door is also very easy to brake. To get best results do not point the camera towards a light source.

Another very important point is to point the camera towards the window intending to see outside may result in a poor image because of glare and lighting conditions.

Don’t place the camera in a shaded area that’s looking into a well-lit area. This will result in a poor display.

For the best results, the light to the sensor located at the front of the camera needs to be the same as the light at the target.

The camera uses infrared LEDs to see at night, in that case, you must clean the lens from time to time. It’s the picture degrades.

Protect the cables from the elements to avoid deterioration avoid placing cameras where electrical interference is expected.

Bend the cable greater than 90 degrees. Do not over lighten cable ties. You must avoid using a staple gun it’s good practice. 

To secure the cable to a wall. And do not stretch and apply a force greater than 25 pounds or 11 kilograms use electrical tape to seal.

4. Wired And Wireless Security Camera System

It is also very important for you to know about the differences between a wired security camera system and wireless. 

We are using both but there are definitely guidelines that have to be adhered to with wireless. 

If you’re going to get the performance and the equipment‘s going to meet your expectations.

Wired And Wireless Security Camera System

So wired systems require a cable whether its net worker coax that you pulled from the camera to the DVR to be up to 1,500 feet on coax. 

Wireless systems transmitted the video signals either through Wi-Fi from the camera to the DVR or through radio frequency from the camera to the DVR.

The wireless cameras are not completely wireless they require powerthey require constant power.

So the camera has got to be located close to a power outlet, or you have to pull a cable from a power outlet to the camera location.

Where To Position CCTV Cameras Home

Wireless transmission eats up lot of power so does night vision eats up lot of power.

Because of that, the cameras require constant hard-wired power. You’re not going to get away with battery-operated cameras. 

mean they’re hardly working 810 hours and then you’re done. The main benefit for wireless camera systems is convenience.

But that shouldn’t be your first and only decide on what system to buy because you‘re giving up a lot for that convenience. 

What you‘re giving up is, first of all, you‘re giving up frame rate wireless video is choppier it doesn’t look like the fluid video.

You‘re seeing here now wired systems do have 30 frames a second light viewing wireless it‘s going to be tough.

It‘s going to be that choppiness to it there’s going to be a lag time from the time that something happens to the time.

You see it on a screen is going to be anywhere from two to five seconds as far as the lead time goes the clarity on wireless systems is going to draw you take a 1080 dp.

Wireless camera and you next to a 1080p wired camera. The wired camera is going to look substantially better.

Even though they’re both set up and they’re transmitting 1080p video. This is the reliability and this is the biggest one of all wireless systems that are not known for the reliability.

There are so many things in the environment that can affect video transmission. That a metal building another wireless router to close a mirror reflecting.

The wireless signal there’s a lot of environmental things that can affect the reliability of the video transmission because of that you do not see wireless.

Technologies dominating the market they never have and at this point from what we can see what the technology is coming out.

They never will they’ll never perform as well as a hardwired system are inconvenient. Because you got it one time.

Think about this one time you just have to get the cable from the camera to  DVR.  And then for the life of the camera or for the life of the system.

You’re going to have the best reliability the best clarity the best frame rate best overall performance.

And so those are the main differences with wireless technologies versus wired and so this comes to the golden rule.

And this is our golden rule. Always hard wire a camera system when you can and then consider Wireless.

When you can’t the rules of wireless are simple. It needs to be residential you need to stay within the parameters that we’re talking about. 

Maximum of four cameras maximum transition mission distance of 150 feet. You have to understand you may have to move or adjust a camera.

Or the location of the DVR to get things working reliably. The wireless systems that we operate the best on the market we know they work. 

It doesn’t jump onto your wireless network at home and slow it down.  It just builds it on its own.

And then transmits the video to this unit and then this unit can plug into your wireless modem. And then you have remote access everywhere this system.

Here is a little different this uses digital radio frequency to transmit the signal from the camera to this DVR monitor.

I hope after reading the complete article you will be able to understand the performance difference between wired and Wireless security camera. 

And you can also realize that wireless camera is easy to install but we can’t trust it at all.